Dell PowerEdge 5160 Panduan Instalasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penyimpanan Dell PowerEdge 5160. Dell PowerEdge 5160 28 halaman. Installing the external drive bay
Juga untuk Dell PowerEdge 5160: Panduan Instalasi (42 halaman), Panduan Instalasi (20 halaman), Manual Pembaruan (8 halaman), Pembaruan Informasi (8 halaman), Panduan Pengguna (42 halaman), Pemasangan Rak (34 halaman), Panduan Pemasangan Perangkat Keras (40 halaman), Panduan Instalasi (36 halaman)

support.dell.com

vertical rail

10-32 x 0.5-inch

screws (2)

front of rack

Figure 1-9. Removing the Slide Assemblies

Repeat step 1 to remove the slide mounting screws at the back of the rack.

Lift the slide assembly out of the rack and place it out of the way.

Repeat this step to remove the slide assembly on the opposite side of the rack.

To remove the cage nuts (used to secure the rack-adapter thumbscrews) from

each vertical rail, use a flat-blade screwdriver or the cage-nut installation tool

(if available), pry down on the outside top edge of the cage nut while pushing

inward on the cage nut to remove it from the vertical rail (see step 3 in

Figure 1-10).

Repeat this step to remove the remaining cage nuts.

Package all the rack installation hardware you removed and label it for future use.

Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

slide-assembly

mounting-bracket

flange

alignment

marks

slide

assemblies (2)

slide alignment screws

1-11