Dell PowerEdge 5160 Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penyimpanan Dell PowerEdge 5160. Dell PowerEdge 5160 36 halaman. Installing the external drive bay
Juga untuk Dell PowerEdge 5160: Panduan Instalasi (42 halaman), Panduan Instalasi (20 halaman), Panduan Instalasi (28 halaman), Manual Pembaruan (8 halaman), Pembaruan Informasi (8 halaman), Panduan Pengguna (42 halaman), Pemasangan Rak (34 halaman), Panduan Pemasangan Perangkat Keras (40 halaman)

1-4

Dell PowerEdge Systems — Installing the External Drive Bay

SCSI hard-disk

drives in external

drive-bay

assembly

SCSI cable

with terminator

SCSI backplane

cable connector

Figure 1-2. Attaching the SCSI Cable

Attach the power cable(s) to the power connector(s) on the back of the drive bay

assembly.

Install the system management ribbon cable (provided with the kit):

Remove the ribbon cable from the SCSI backplane board interface connector

(the BACKPLANE connector) on the system board. Do not disconnect the

other end of this cable from its connector on the SCSI backplane board.

Locate the system management ribbon cable (provided with the kit). Con-

nect the end of this cable, marked PLANAR, to the BACKPLANE connector

on the system board.

Attach the free end of the cable you disconnected in step a. to the middle

connector of the system management ribbon cable you just installed in step

b. Secure the connectors with latches on the new system management

cable connector.

Attache the system management cable connector marked FDHDBP to the

connector labeled PLANAR 1X2 on the back of the drive bay assembly.

terminator

SCSI connector

(PRIMARY SCSI-A)

SCSI connector

(PRIMARY SCSI-B)