Dell PowerEdge SC420 Pembaruan Informasi - Halaman 2
Jelajahi secara online atau unduh pdf Pembaruan Informasi untuk Penyimpanan Dell PowerEdge SC420. Dell PowerEdge SC420 21 halaman. Expansion enclosure
Juga untuk Dell PowerEdge SC420: Manual Penggantian (14 halaman), Panduan Pemilik (26 halaman), Panduan Memulai (7 halaman), Panduan Pemilik (21 halaman)
Halaman Cetak
Diagnostics Indicator Codes for Memory Configuration Errors
The four diagnostics indicators on the system front panel display error codes during system
startup. Table 1 lists the one pattern associated with a memory configuration error. For a
comprehensive list of diagnostic indicator codes that apply to your system, see "Diagnostic
Indicator Codes" in the Dell PowerEdge SC420 Systems Installation and Troubleshooting Guide.
Table 1. Diagnostic Indicator Codes
Code
A B C D
= y e l l o w
= g r e e n
= o f f
RAID Storage Manager Application Requires Reboot
NOTICE:
For maximum data protection, it is recommended that the drive cache settings remain in
the default disabled (write-through) state.
On systems equipped with a supported SCSI controller, you must reboot the system after changing
the drive cache setting to write-back cache enabled. The reboot is required to make the change to
the drive cache effective.
RAID Storage Manager Software
RAID Storage Manager software for Red Hat Linux is not supported on the PowerEdge SC420.
Causes
Memory configuration
error.
Corrective Action
See "Troubleshooting System Memory" in
your Installation and Troubleshooting Guide.