Dell PowerVault 110T DLT1 Manual - Halaman 2
Jelajahi secara online atau unduh pdf Manual untuk Penyimpanan Dell PowerVault 110T DLT1. Dell PowerVault 110T DLT1 15 halaman. Dell powervault 110t dlt vs160 tape drive - user's guide
Juga untuk Dell PowerVault 110T DLT1: Panduan Pengguna (23 halaman), Manual (47 halaman), Panduan Pengguna (39 halaman)
Halaman Cetak
Executive summary
During the operation of the Dell™ PowerVault™ DL backup to
Disk Appliance Powered by Symantec Backup Exec™, it may
become necessary to migrate or copy backup data from one
appliance to another. Depending on the appliance configuration,
this data may reside on disk, tape, or both. This guide provides
instructions for migrating the data from one appliance to
another for the following items:
•
Disk Group(s)
•
Tape Media
•
Tape Library/Libraries
•
Data Set(s)
•
Disk Group(s) not associated with a PowerVault DL Appliance
Migrating an entire disk group
An entire Disk Group (the physical drives making up the virtual
disks on the PowerVault DL Appliance) must be migrated
together from one PowerVault DL Appliance to another.
Migrating single drives or partial drives in a Disk Group will result
in data loss for the entire Disk Group.
Perform the following steps to migrate a Disk Group from one
appliance to another:
1.
Determine the Disk Group for migration.
Note: Although Disk Groups in a standard configuration state
(as defined in the Dell PowerVault™ DL Appliance Powered
by Symantec Backup Exec Quick Start Guide) are typically
contained in Slots 1-7 or Slots 8-14 on each PowerVault
MD1000 Storage Enclosure, there are cases where the
slot locations may be different or have changed. Using the
following procedure ensures the correct drives are migrated
in all cases.
a.
From Symantec's Backup Exec Management Console,
Media Migration
2