Dell PowerVault 50F Panduan Pengguna - Halaman 41

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Dell PowerVault 50F. Dell PowerVault 50F 42 halaman. Dell powervault 56f switches rack installation guide
Juga untuk Dell PowerVault 50F: Manual Koneksi (38 halaman), Instal Manual (8 halaman), Panduan Pemasangan Rak (28 halaman)

Halaman Cetak

support.dell.com

The following list defines or identifies

technical terms, abbreviations, and acro-

nyms used in Dell™ user documents.

A fabric software facility that supports

multicast group management.

The FC Arbitrated Loop (FC-AL) is a stan-

dard defined on top of the FC-PH

standard. It defines the arbitration on a

loop where several FC nodes share a com-

mon medium.

In Class 2 service, the fabric and destina-

tion N_Port provide connectionless

service with notification of delivery or non-

delivery between the two N_Ports.

Class 3 service provides connectionless

service without notification of delivery be-

tween N_Ports. The transmission and

routing of Class 3 frames is the same as

for Class 2 frames.

A class of service used for interswitch

control traffic. It provides connectionless

service with notification of delivery or non-

delivery between two E_Ports.

An SNMP community is a relationship be-

tween an SNMP agent and a set of SNMP

managers that defines authentication, ac-

cess control, and proxy characteristics.

Credit, applied to a switch, is a numeric

value that represents the maximum num-

ber of receive buffers provided by an

F_Port or FL_Port to its attached N_Port

or NL_Port respectively such that the

N_Port or NL_Port may transmit frames

without overrunning the F_Port or

NL_Port.

The domain number uniquely identifies

the switch in a fabric. This switch domain

ID is normally automatically assigned by

the switch and may be any value between

0 and 31. This number may also be as-

signed manually.

E_D_TOV (Error-Detect Time-Out Value)

defines the time the switch waits for an

expected response before declaring an er-

ror condition. The error detect time out

value is adjustable in 1 ms increments

from two seconds up to 10 seconds.

A port is designated an E_Port when it is

used as an interswitch expansion port to

connect to the E_Port of another switch

to build a larger switch fabric.

The name applied to a network resulting

from the interconnection of switches and

devices by interswitch links (ISLs). A fab-

ric is an active, intelligent, nonshared

interconnect scheme for nodes.

Glossary