Dell PowerVault 530F Pemasangan Rak - Halaman 8

Jelajahi secara online atau unduh pdf Pemasangan Rak untuk Penyimpanan Dell PowerVault 530F. Dell PowerVault 530F 34 halaman. Installing versarails
Juga untuk Dell PowerVault 530F: Pembaruan Perangkat Lunak (12 halaman), Panduan Pemasangan Perangkat Keras (40 halaman)

Halaman Cetak

! " #$ %

Observe the following guidelines when working with options:

Do not connect or use a modem or telephone during a lightning storm. There

may be a risk of electrical shock from lightning.

Never connect or use a modem or telephone in a wet environment.

Do not plug a modem or telephone cable into the network interface controller

(NIC) receptacle.

Disconnect the modem cable before opening a product enclosure, touching or

installing internal components, or touching an uninsulated modem cable or jack.

Do not use a telephone line to report a gas leak while you are in the vicinity of the

leak.

Observe the following precautions for laser devices:

Do not open any panels, operate controls, make adjustments, or perform

procedures on a laser device other than those specified in the product's

documentation.

Only authorized service technicians should repair laser devices.

Before you remove the computer covers, perform the following steps in the sequence

indicated.

Turn off your computer and any devices.

Ground yourself by touching an unpainted metal surface on the chassis, such as

the metal around the card-slot openings at the back of the computer, before

touching anything inside your computer.

While you work, periodically touch an unpainted metal surface on the computer

chassis to dissipate any static electricity that might harm internal components.