Dell PowerVault 725N Pembaruan Firmware - Halaman 5

Jelajahi secara online atau unduh pdf Pembaruan Firmware untuk Penyimpanan Dell PowerVault 725N. Dell PowerVault 725N 12 halaman. Nas systems with software raid
Juga untuk Dell PowerVault 725N: Manual Pembaruan (10 halaman), Pembaruan Informasi (28 halaman)

Dell PowerVault 725N Pembaruan Firmware
Change the IP address on the network adapter of the client system to 10.40.10.1, the
7
subnet mask to 255.255.255.0, and the gateway to 10.40.10.1:
From the desktop of the client system, right-click My Network Places and select
a
Properties.
In the Network and Dial-up Connections window, right-click the network
b
interface controller that you connected to the NAS system with the crossover
cable in step 1.
Click Properties.
c
In the Local Area Connection Properties window, click Internet Protocol
d
(TCP/IP), and then click Properties.
Click Use the following IP address.
e
For IP address, type 10.40.10.1.
f
For Subnet mask, type 255.255.255.0.
g
For Default Gateway, type 10.40.10.1.
h
Click OK, and then click OK to close the Local Area Connection Properties
i
window.
If you are prompted to reboot the client system, click No.
j
Create a share for the SCSI firmware:
8
If you are not already logged in, log in to the client system with an account that
a
has administrator privileges.
Download the new SCSI firmware and utilities from support.dell.com and place
b
them in a directory on your client system.
Ensure that both 39160.rom and flash4.exe are downloaded to this directory.
Double-click My Computer and browse to the directory where you downloaded
c
the firmware.
Right-click this directory, and select Sharing.
d
Click Share this folder.
e
Type SCSI for the name of the share, and then click OK to confirm the share
f
settings.
Install the Dell Reinstallation Console from the Resource CD:
9
Insert the Resource CD into the CD drive of your client system.
a
The Dell PowerVault 725N Resource CD window displays in a browser window.
NOTE: If the CD does not run automatically, double-click the start.bat file on the CD.
Upgr ading Yo ur 39160 SC SI Card Fir mware
1-3