Dell PowerVault DL4000 Buku Pegangan - Halaman 16

Jelajahi secara online atau unduh pdf Buku Pegangan untuk Penyimpanan Dell PowerVault DL4000. Dell PowerVault DL4000 28 halaman. Setting up your dell powervault dl4000 backup to disk appliance
Juga untuk Dell PowerVault DL4000: Panduan Penyebaran (22 halaman), Catatan Rilis (11 halaman), Panduan Memulai (10 halaman), Manual (4 halaman), Manual (2 halaman), Memulai dengan Sistem Anda (2 halaman)

Dell PowerVault DL4000 Buku Pegangan
The cleaning light on an LTO drive turns on for the following reasons:
A periodic maintenance threshold has exceeded.
If the tape drive has processed the number of equivalent FFP,
including read and writes for the generation of the drive (this can be
converted to TB) before reaching the maximum MM.
The drive has processed the maximum MM for the generation of the
drive indicated (MMxE6) before reaching the maximum amount of
data that can be processed.
A high error rate has occurred. This can happen due to the following:
A head clog
A hardware failure on the drive
Bad or marginal media
NOTE:
If you perform a backup with verification, you see a cleaning request twice
as frequently as you do when you perform a backup without verification.
Verification doubles the number of passes the tape makes over the head.
NOTE:
Most backup applications support Tape Alerts. If the tape drive requests
cleaning, the backup software notifies you of the need to clean.

Characteristics of Expired LTO Cleaning Tape

Table 9. Characteristics of Expired LTO Cleaning Tape in Various Drives
Drive Type
Dell PowerVault
110T LTO
Dell PowerVault
110T LTO-1
16
LTO Media Handbook
Cleaning with a Good Tape
• Ready light blinks green.
• Use cleaning cartridge
light turns on.
• Ejects tape when done.
• Power light on solid green.
• Activity light on solid
green.
• Status light on solid amber.
• Ejects tape when
complete.
Cleaning with an Expired Tape
• Ready light blinks green.
• Ejects tape out shortly after
inserting.
• Power light on solid green.
• Activity light on solid green.
• Status light blinks amber.
• Ejects tape shortly after inserting.