EarthLinked PHXTI Series Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri EarthLinked PHXTI Series. EarthLinked PHXTI Series 12 halaman. Pool heat exchangers

Halaman Cetak

1. Pre-Installation

Upon receipt of the swimming pool heat exchanger, check the model number against the bill of

lading.

The Earthlinked Technologies model numbers are as follows:

This heat exchanger is approved for use with swimming pool heat pump heating systems using

R-410A, R-407C or R-22 refrigerants.

This swimming pool heat exchanger is sold as a system component, and must be sized and

properly matched to other system components to provide the anticipated performance and safe

operation of the system.

2. Installation

The heat exchanger is designed to be used as a replacement component in an existing swimming

pool heat pump heating system, or as a component of a new swimming pool heat pump heating

system.

The overall dimensions of the heat exchanger are illustrated in Figure1. The heat exchanger must

be mounted on a level, hard surface and oriented in the direction shown in Figure 1 (vertically, with

connections on the top) to perform properly.

PHXTI-IM (05/13)

Model Number

PHXTI-90

PHXTI-115

PHXTI-130

Rating, BTU/HR

90,000

115,000

130,000

Page 3