Dell PowerVault LTO4-120 Panduan Pengguna - Halaman 43
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Dell PowerVault LTO4-120. Dell PowerVault LTO4-120 44 halaman. Powervault tape systems
Juga untuk Dell PowerVault LTO4-120: Panduan Memulai (33 halaman), Buku Pegangan (28 halaman), Panduan Pengguna (26 halaman)
Halaman Cetak
If you suspect that the cartridge has been mishandled but it appears useable, copy any data onto a good cartridge immediately for possible data
l
recovery. Discard the mishandled cartridge.
Review handling and shipping procedures.
l
Handle the Cartridge Carefully
Do not drop the cartridge. If the cartridge drops, slide the cartridge door back and ensure that the leader pin is properly seated in the pin-retaining
l
spring clips.
Do not handle tape that is outside the cartridge. Handling the tape can damage the tape's surface or edges, which may interfere with read or write
l
reliability. Pulling on tape that is outside the cartridge can damage the tape and the brake mechanism in the cartridge.
Do not stack more than six cartridges.
l
Do not degauss a cartridge that you intend to reuse. Degaussing makes the tape unusable.
l
Cleaning the Tape Mechanism
Dell PowerVault LTO4-120 drives have been developed to have a minimal cleaning requirement. The tape drive will display a C on the single-character display
and the status light will flash amber when the drive needs cleaning. Only insert a cleaning cartridge into the tape drive when the C is displayed.
NOTICE: Only use LTO cleaning cartridges that are labeled "universal." The Generation 4 tape drive is only compatible with the LTO Ultrium universal
cleaning cartridges. Use of any other type of cleaning cartridge or method can damage the read/write head in your drive. If you load any other type
of cleaning cartridge, the tape drive displays a 7 in the SCD and retains the cartridge until it is ejected manually by pressing the Eject button.
An LTO Ultrium universal cleaning cartridge is supplied with each tape drive. Do not use swabs or other means of cleaning the heads. The cleaning cartridge
uses a special tape to clean the tape heads.
Though the number may vary according to the manufacturer, the universal cleaning cartridge is generally valid for 50 cleanings. If you try to use the cleaning
cartridge beyond 50 cleanings, an error code of 7 will be displayed. Eject the cleaning cartridge and replace it with a new one.
To use the LTO Ultrium universal cleaning cartridge:
1. Insert a cleaning cartridge into the tape drive. The tape drive performs the cleaning automatically. When the cleaning is finished, the drive ejects the
cartridge.
2. Remove the cleaning cartridge from the drive.
Back to Contents Page