Dell PowerVault MD2460 Panduan Pemilik - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penyimpanan Dell PowerVault MD2460. Dell PowerVault MD2460 47 halaman. Direct-attach storage for poweredge servers

Halaman Cetak

Figure 9. Install the inner rail onto the chassis

4. Secure the rails by installing two screws on each side of the enclosure.

Install the rails on the rack

This task describes the procedure to install the rails. You can install the rails into either a square or round hole rack.

1. Identify the rack holes for installing the rails and install the provided nuts on them. Use square or circular nuts depending on

the type of rack post.

2. Attach the right rail to the back post of the rack.

a. Align the right rail with the holes on the back post of the rack.

b. Push the rail back while holding the latch open.

c. Once the rail engages to the rack post, release the latch to lock the rail in place.

d. Insert the screws and secure the rail to the back post.

Installing the enclosure