Dell PowerVault MD3200i Series Panduan Penyebaran - Halaman 39

Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Penyimpanan Dell PowerVault MD3200i Series. Dell PowerVault MD3200i Series 41 halaman. Storage arrays
Juga untuk Dell PowerVault MD3200i Series: Manual Pembaruan (32 halaman), Petunjuk Pemasangan Rak (2 halaman), Panduan Pengguna (46 halaman), Matriks Dukungan (12 halaman), Panduan Instalasi (18 halaman), Pembaruan Informasi (1 halaman), Matriks Dukungan (11 halaman), Matriks Dukungan (17 halaman), Buku Panduan Teknis (38 halaman), Buku Putih (22 halaman), Manual (16 halaman)

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software

The first thing to do is to note the vmhba# of the iSCSI Software Initiator. This can be seen in the vCenter

GUI under Configuration -> Storage Adapters.

This can also be found by running the following CLI command to discover all SCSI devices including the

iSCSI software adapter:

esxcfg-scsidevs –a

The output will look something like the following:

vmhba33 iscsi_vmk link-n/a iscsi.vmhba33

() Software iSCSI

In this example from both the GUI and CLI we can determine that the vmhba# for the iSCSI Software

Initiator is vmhba33. This will be used in the next part. This will differ on various systems based on the

devices installed.

The next piece of information to gather is the vmk# of each of the VMkernel ports. This can be done via

the GUI or CLI.

To determine the vmk# of each VMkernel port from the GUI navigate to Configuration -> Networking.

From the vSwitch that was created earlier under each VMkernel port, the vmk# will be listed.

NOTE: It is important to recognize that they may not start with vmk0, VMotion ports and other VMkernels

will utilize the same numbers based on the order they are created.

Page 37