Dell PowerVault MD3660i Series Storage Array Panduan Pemecahan Masalah - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Penyimpanan Dell PowerVault MD3660i Series Storage Array. Dell PowerVault MD3660i Series Storage Array 20 halaman. Storage arrays
Juga untuk Dell PowerVault MD3660i Series Storage Array: Manual Perangkat Keras dan Perangkat Lunak (25 halaman), Panduan Instalasi (11 halaman), Panduan Memulai (10 halaman), Pembaruan Informasi (8 halaman), Petunjuk Pemasangan Rak (2 halaman), Menyiapkan (2 halaman), Panduan Pemecahan Masalah (18 halaman), Panduan Penyebaran (24 halaman)

You can start MDCU in any of the following ways:

On Windows-based systems:

During MD Storage Manager installation from the DVD shipped with your storage array, select

the option to automatically start MDCU following reboot

Once you have installed the management software and utilities from the DVD, choose

Start>Programs>Dell>MD Storage Software>Modular Disk Configuration Utility.

On Linux-based systems:

Once you have installed the management software and utilities from the DVD, launch MDCU

Go to /opt/dell/mdstoragesoftware/mdconfigurationutility and run the executable

Whichever way you launch MDCU, the window shown in Figure 1 is displayed.

Figure 1. Dell MD Configuration Utility for iSCSI

Setting Up iSCSI Manually: Using the MD Storage Manager

To manually set up iSCSI communication between your host server and storage array, perform the

following steps:



Launch MD Storage Manager

From the Setup tab, choose Manually Identify Host



Using the MD Storage Manager wizard, enter the host and management information for each iSCSI host

used.