Dell PowerVault NX1950 Panduan Penyebaran - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Penyimpanan Dell PowerVault NX1950. Dell PowerVault NX1950 38 halaman. For vmware esx server software
Juga untuk Dell PowerVault NX1950: Panduan Penyebaran (34 halaman), Panduan Informasi Penting (26 halaman), Memulai (49 halaman), Panduan Instalasi dan Pemecahan Masalah (48 halaman), Panduan Peningkatan (18 halaman), Panduan Referensi (4 halaman), Menyiapkan (2 halaman), Menggunakan (2 halaman), Panduan Konfigurasi (11 halaman)

Halaman Cetak
Dell PowerVault NX1950 Panduan Penyebaran
If you selected Configure RAID, configure the RAID with one of the
c
following options:
Click Go to Advanced Wizard at the top left of the page and
•
follow the prompts.
•
Select a RAID level and click Continue.
NOTE:
The RAID configuration summary appears.
Click Continue.
d
The following message appears:
All existing virtual disk(s) on this controller
will be deleted and all data will be lost.
Click OK to continue.
e
The Select an Operating System to Install window appears.
10 To set up a new boot partition, select the appropriate file system and size
for your partition and click Continue.
NOTICE:
If the hard drive has a partition, the Confirm to delete partition window
appears. Click Continue. Dell Systems Build and Update Utility deletes all existing
partitions on the hard drive.
NOTE:
file system.
The Network Adapter(s) configuration window appears.
11 Select one of the following options and click Continue:
•
Obtain IP address from the DHCP server.
•
Specify an IP address.
The Enter Configuration Information: Microsoft Windows Server 2003
x64 Edition window appears.
12 Enter your system information in the appropriate fields, and click Continue.
NOTE:
information.
NOTE:
the top-right corner.
24
Deployment Guide
Select RAID1 to ensure adequate redundancy for the boot disk.
For maximum system security, Dell recommends selecting NTFS-NT
If you leave any field blank, Windows Setup prompts you later for this
To provide more configuration information, click the Advanced tab in