Dell PowerVault NX3500 Panduan Teknis - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Penyimpanan Dell PowerVault NX3500. Dell PowerVault NX3500 17 halaman. Dell powervault network attached storage solution
Juga untuk Dell PowerVault NX3500: Menyiapkan (2 halaman)

Halaman Cetak

Transition Guide for PowerVault MD3200i and MD3220i Series Arrays

PowerVault NX3500 Network Cabling

13. Configuration Overview

The PowerVault NAS Configuration Utility (NASCU) walks you through

the steps necessary to set up the network configuration and pair your

PowerVault NX3500 controllers. The configuration process involves the

following steps:

Storage Array Identification – NASCU performs iSCSI discovery of your

storage array. The NASCU wizard asks you to enter the last IP from the

range of iSCSI host port IPs you have configured on your MD storage

array.

NAS Controller Discovery – You enter the MAC address of the

embedded NIC 1 for each PowerVault NX3500 controller. Embedded NIC

1 MAC address can be found on the system identification panel

underneath the front bezel of your PowerVault NX3500s or in the front

panel LCD menu.

NAS Cluster Identification - You specify the name that will be used to

identify your PowerVault NX3500 cluster within the PowerVault NAS

Manager web interface.

Primary Network Configuration – You specify the following: NAS

Management virtual IP, Client Access virtual IP, and controller IPs

(private maintenance IPs for each individual PowerVault NX3500

controller in your cluster; these should not be used by clients directly).

Internal Network Configuration – You specify the IPs to be used for

internal communication between your paired PowerVault NX3500

controllers. These IPs should be from a private IP space not reachable

from any other system in your network.