Dell PowerVault TL2000 Panduan Konfigurasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Dell PowerVault TL2000. Dell PowerVault TL2000 22 halaman. Tape library
Juga untuk Dell PowerVault TL2000: Catatan Rilis (3 halaman), Memulai (38 halaman), Faq (26 halaman), Panduan Memulai Cepat (7 halaman), Manual Perangkat Lunak (16 halaman), Panduan Informasi Penting (10 halaman), Adendum Panduan Pengguna (2 halaman), Panduan Memulai (3 halaman), Petunjuk Pemasangan (17 halaman), Brosur (4 halaman), Panduan Pengguna (20 halaman)

Dell PowerVault™ TL4000/TL2000 Failover Guide

Single FC Drive Failover configuration

(Two HBA adapters, One FC switch, and one FC drive)

Main Path

LT05 Specific Requirements For Failover Support

The introduction of LT05 drive support in the Dell PowerVault™ TL2000 and TL4000 allowed additional

failover configurations. These configurations are unique to the Dell PowerVault™ TL2000 and TL4000

configured with LT05 devices and do not extend to LT04 configurations.

Important Note: Failover is only supported on Dell PowerVault™ TL2000 when configured with LT05

drives

Failover Reference Configuration 8:

One host with two Fibre Channel ports, one Fibre Channel switch, and a Dell PowerVault™

configured with three Fibre Channel drives

In this configuration, failover occurs if one or more of the following occurs:

‐ One of the drives fails (hardware failure or is drive disconnected from the HBA port)

‐ One of the Fibre Channel ports in the HBA fails

11 | P a g e

Always refer to www.dell.com\support for latest documentation and updates

Failover Path

Figure 7: Reference Configuration 7

1 2 / 3 1 / 0 9 v e r s i o n 2 . 0