Dell PS4110 Panduan Pemilik Perangkat Keras - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pemilik Perangkat Keras untuk Penyimpanan Dell PS4110. Dell PS4110 48 halaman. Storage arrays
Juga untuk Dell PS4110: Panduan Pengguna (20 halaman), Manual Perangkat Keras (50 halaman), Ikhtisar (7 halaman), Instalasi (2 halaman)
Halaman Cetak
Hardware Owner's Manual
Table 1
describes the front panel features.
Figure 3: Front Panel Features and Indicators (3.5-inch Drives)
Figure 4: Front Panel Features and Indicators (2.5-inch Drives)
Item Indicator
Icon
Array status
1
LED
2
Power LED
Drive Release
3
None
Latch
The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced only
Note:
by support personnel. During the array power-up sequence, these LEDs will cycle through different states until
the array is fully started and the active control module has been determined.
4
Table 1: Front Panel Feature Descriptions
Description
The array status LED lights when the array power is on.
•
Off—No power.
•
Steady blue—Array status is OK.
•
Slow blinking blue—Array status is Standby mode.
•
Blinking blue—Administrator request to identify the array (see the Group
Manager online help).
•
Steady amber—Critical status.
•
Blinking amber—Warning.
The power LED is ON when at least one power supply is supplying power to the
array.
•
Off—No power, or the array is in Standby mode.
•
Steady green—Array has at least one power supply providing power, and
array is not in Standby mode.
Enables you to remove a drive from the array.
1 Basic Storage Array Information