Dell SCv2080 Panduan Memulai - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Penyimpanan Dell SCv2080. Dell SCv2080 24 halaman. Storage center
Juga untuk Dell SCv2080: Panduan Pemilik (49 halaman), Panduan Memulai (23 halaman), Panduan Pemilik (45 halaman)

Halaman Cetak

Figure 2. Mount the SCv2080 Storage System Chassis

Secure the storage system chassis to the rack using hold-down brackets.

If the Storage Center system includes an expansion enclosure, mount the expansion enclosure above

the storage system. See the instructions included with the expansion enclosure for detailed steps.

Installing the Hard Drives

Hard drives are connected to the backplane of the drawers using Disk Drive in Carrier (DDIC) hard drive

carriers.

The minimum number of drives in an SCv2080 storage system is 28 (one full, front row in the top drawer

and one full, front row in the bottom drawer).

Open the bottom drawer.

CAUTION: If the storage system operates for too long (depending on altitude) with a drawer

open, the storage system may overheat, causing a power failure and data loss. Such use may

invalidate the warranty.

a. Push and hold both drawer latches toward the center of the drawer.

b. Pull the drawer all the way out until it stops.

Insert each disk drive in carrier (DDIC) into the drawer, one at a time.

CAUTION: To maintain proper airflow, the drawers must be populated with drives in whole

rows (there are three rows of 14 drives per drawer). The number of populated rows between

drawers must not differ by more than one. Populate the rows from the front to the rear of the

drawer.

a. Hold the DDIC vertically and slide it most of the way into the slot.

b. Using both hands, apply downward pressure firmly and equally across the DDIC.

c. While maintaining downward pressure on the DDIC, slide the top plate toward the back of the

drawer until it clicks in place.