Dell EMC N2200-ON Series Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Dell EMC N2200-ON Series. Dell EMC N2200-ON Series 10 halaman. Powerswitch; external power supply installation
Juga untuk Dell EMC N2200-ON Series: Panduan Instalasi (10 halaman)
Halaman Cetak
These instructions explain the external power supply (EPS) installation for the Dell EMC PowerSwitch N2200-ON and N3200-
ON full-width and half-width switches. You can use the optional EPS on a desktop, wall mount, or in a rack.
● The model name of the EPS Shelf with one PSU is MPS-1S.
● The model name of the EPS Shelf with three PSUs is MPS-3S.
NOTE:
For switch installation instructions, see the switch-specific Dell EMC PowerSwitch Installation Guide at
www.dell.com/support.
Regulatory models
● Model number E51W
● RTN: E51W001 for one slot
● RTN: E51W003 for three slots
Document revision history
Table 1. Revision history
Revision
Date
A00
2020–01
Topics:
•
Desktop mount
•
MPS-1S two-post installation
•
MPS-3S two-post installation
•
MPS-1S wall mount
•
Important information
•
Desktop mount
To use the EPS on a desktop, first attach the four small rubber feet to the underside of the switch.
1. Locate the four rubber feet shipped with the EPS.
2. Remove the paper backing on the bottom of one of the rubber feet.
3. Adhere the rubber foot to one of the four round position marks on the underside of the switch.
4. Repeat the process for the remaining three rubber feet.
MPS-1S:
N-Series EPS installation
Description
Initial release.
N-Series EPS installation
1
3