Dell EMC PowerSwitch Z9432F-ON Setup Manual - Halaman 23
Jelajahi secara online atau unduh pdf Setup Manual untuk Beralih Dell EMC PowerSwitch Z9432F-ON. Dell EMC PowerSwitch Z9432F-ON 27 halaman.
Halaman Cetak
6. Return the plastic cover back to the PSU socket.
7. Attach the yellow and green wire to the PSU GND. Secure the wire with the M5 screw.
To uninstall the cable from the DC PSU, remove the plastic cover and unscrew the M4 and M5 screws. Pull the DC cable out
from the DC PSU socket.
Optics installation
WARNING:
When working with optical fibers, follow all warning labels and always wear eye protection. Never
look directly into the end of a terminated or unterminated fiber or connector as it may cause eye damage.
1. Position the optic so it is in the correct position.
The optic has a key that prevents it from being inserted incorrectly.
2. Insert the optic into the port until it gently snaps into place.
NOTE:
When you cable the ports, be sure not to interfere with the airflow from the small vent holes above and below the
ports.
Z9432F-ON switch installation
23