Dell Force10 S4810 Panduan Konfigurasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Dell Force10 S4810. Dell Force10 S4810 17 halaman. Dell force10 s4810 switch
Juga untuk Dell Force10 S4810: Panduan Memulai Cepat (27 halaman), Panduan Penyebaran (36 halaman), Panduan Konfigurasi (17 halaman)

Halaman Cetak

1. Switch Details
2. Delete Startup Configuration
3. Configure out of Band (Oob) Management Port
4. Hardware Configuration
5. Enable Switch Ports

FTOS(conf-if-range-fo-0/48-52)#no ip address

FTOS(conf-if-range-fo-0/48-52)#mtu 12000

FTOS(conf-if-range-te-0/48-52)#no shutdown

FTOS(conf-if-range-fo-0/48-52)#flowcontrol rx on tx off

FTOS(conf-if-range-fo-0/48-52)#port-channel-protocol lacp

FTOS(conf-if-range-fo-0/48-52-lacp)#port-channel 1 mode active

FTOS(conf-if-range-fo-0/48-52-lacp)#exit

FTOS(conf-if-range-fo-0/48-52)#exit

FTOS(conf)#exit

2.11

Save configuration

FTOS#copy run start

2.12

Configure additional switch

Repeat the commands from section 2 to configure the second switch.

SCG1000

Force10 S4810 Configuration Guide