Earthlite Sedona Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perabotan Dalam Ruangan Earthlite Sedona. Earthlite Sedona 12 halaman. Spa treatment table

Halaman Cetak

SECTION 5: CARE & MAINTENANCE

Cleaning & Ongoing Maintenance

With proper maintenance, your table is designed to give you years of trouble-free operation.

To ensure your table will continue to function properly and keep its appearance, we

recommend the following.

Troubleshooting

This helpful troubleshooting guide will provide you with information about how to recognize

a problem with your table, determine possible causes, and find a solution.

In the event your specific situation is not covered in this guide, please contact Earthlite so

our technical support department can assist you. Beyond the troubleshooting guide below,

do not attempt to repair the table yourself. This can void your warranty.

Unauthorized service will not be covered. Please be sure to contact Earthlite Customer

Service first at (800) 872-0560, (760) 599-1112 Int'l.

Issue

One-Touch Lever

is difficult to

move

DO NOT USE acetone, "Armor All" type cleaners, citrus-based cleaners,

or industrial cleaners. These can seriously damage the upholstery. Such

damage would not be covered under warranty.

Remove day-to-day dirt and smudges with a mild soap and water solution.

For tough stains and to disinfect, use a (100 to 1) water to bleach solution.

Spray a damp cloth with the solution to clean.

After each cleaning, gently wipe the upholstery with a damp cloth and clean

water, then allow upholstery to air dry before using or storing.

For more difficult stains, please contact your dealer or please call us directly

for guidance. For best results, use only the products suggested above.

To maintain the wood finish and retouch scratches, use a high quality

furniture wax.

Regularly check to ensure the table is level and stable.

See page 6 for leveling instructions.

Check the cable for any kinks or sharp bends from the lever to the gas

springs. The cable should have a soft radius in order to allow the inner

cable to travel freely in the cable sheath. If the cable is kinked, contact

Living Earth Crafts.

Care Recommendation

Solution