Dell Networking N30 Series Panduan Instalasi - Halaman 36

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Dell Networking N30 Series. Dell Networking N30 Series 49 halaman.

Figure 22. Installing the N30xx in a Front-Rack Configuration

Switch

Mounting screw

Installing as a Free-standing Switch

NOTE:

Dell Networking strongly recommends mounting the switch in a rack.

Install the switch on a flat surface if you are not installing it in a rack. The surface must be able to support the weight of the switch and the

switch cables. The switch is supplied with four self-adhesive rubber pads.

Attach the self-adhesive rubber pads on each location marked on the bottom of the switch.

Set the switch on a flat surface. Make sure that it has proper ventilation by leaving 5 cm (2 inches) on each side and 13 cm (5 inches)

at the back.

Stacking on N30xx Series Switches

This section explains how to stack multiple N30xx series switches.

Rail bracket

N30xx Series Installation