Dell PowerConnect 2224 Panduan Pengguna - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Dell PowerConnect 2224. Dell PowerConnect 2224 38 halaman. Technical specifications update for the dell powerconnect 2200/2300 series ethernet switches
Juga untuk Dell PowerConnect 2224: Pembaruan Spesifikasi Teknis (2 halaman), Panduan Pengguna (24 halaman)
Halaman Cetak
Table 2-1. Basic Troubleshooting (continued)
Problem
Link speed LED indicates a lower
speed than expected.
Link LED is lighted, but the
activity (ACT) LED does not
blink.
Link LED is lighted and the
FDX/HDX LED blinks
occasionally.
Link LED is lighted and the
FDX/HDX LED blinks frequently.
Probable Cause
Incorrect cable grade.
Damaged cable.
The cable's maximum distance
has been exceeded.
There is no Ethernet traffic on the
link. The LED blinks only when
traffic is being passed to or sent
from a device that is connected to
the port.
The attached device is not
configured correctly.
This can be normal link activity.
Some collisions take place during
normal operation.
Mismatched duplex mode.
The link is reaching its maximum
capacity.
Corrective Action
Ensure that you are using
Category 5 cable or better for all
10Base-T and 100Base-T links, or
Category 5e for 1000Base-T links.
Test any cables that have kinks,
sharp bends, or appear to be
damaged.
10Base-T, 100Base-T, and
1000Base-T cables have
limitations for link lengths. Move
the connected device closer to the
switch and use a shorter cable.
No action required.
Verify that the port or NIC on the
attached device is operating
properly.
No action required.
Ensure that any devices
connected to the switch are set to
automatically detect and set port
speed and duplex settings.
Resegment the network to
decrease the number of users on
the link.
Troubleshooting
17