Dell PowerConnect 2624 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Dell PowerConnect 2624. Dell PowerConnect 2624 38 halaman. Powerconnect 26 series
Juga untuk Dell PowerConnect 2624: Panduan Pengguna (21 halaman)

Halaman Cetak

Figure 1-3. PowerConnect 2624

power LED

FDX/HDX LEDs

SPD/LNK/ACT LEDs

RJ-45 ports

SFP port

Connecting Devices

RJ-45 Switch Ports

RJ-45 connectors are located on the front panel of the switch.

NOTE:

Ensure that Category 5E (CAT 5E) cabling is used for connecting devices at 1000-Mbps Gigabit

Ethernet speed.

All ports can negotiate full- and half-duplex modes automatically. These switching ports allow users

to connect the switches to 10Base-T, 100Base-TX and 1000Base-T devices.

SFP Port

On the 24-port switch, you can use the SFP port to connect to a device that is more than

100 meters away. However, using the SFP port disables the RJ-45 connector of port 24 on the

switch.

Connecting Switches to Each Other

Each port supports Auto MDI and MDIX functionality. When cascading with other switches or

hubs, each port can connect directly to a switch or hub with straight-through twisted-pair cable

(see Figure 1-4).

Introduction