Dell POWERCONNECT 5524 Panduan Memulai - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Dell POWERCONNECT 5524. Dell POWERCONNECT 5524 20 halaman. Powerconnect 5500 series
Juga untuk Dell POWERCONNECT 5524: Catatan Rilis (15 halaman)

Halaman Cetak

Stacking

Overview

Each switch is a member in a stack, although the stack may consist of only a

single switch. Up to eight switches are supported per stack.

All stacks must have a Master unit, and may have a Master Backup unit. All

other switches are connected to the stack as members (slaves).

Stacking Switches

PowerConnect 5500 series switches use two HDMI 10G ports for stacking.

To connect the switches in the stack:

1 Insert one end of an HDMI cable into the left-hand HDMI port on the

switch at the top of the stack and the other end into the right-hand HDMI

port of the switch immediately below it.

2 Repeat this process until all switches are connected.

3 (Optional) Connect the left-hand HDMI port of the switch at the bottom

of the stack to the right-hand HDMI port of the switch at the top of the

stack. This step provides increased bandwidth and redundancy.

Getting Started Guide