Dell PowerConnect 5548 Panduan Memulai - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Dell PowerConnect 5548. Dell PowerConnect 5548 20 halaman. Powerconnect 5500 series
Juga untuk Dell PowerConnect 5548: Catatan Rilis (15 halaman)

Halaman Cetak

Installation

Overview

This guide describes how to install and run the PowerConnect 5500 series

switches. For more information, see the Dell PowerConnect 5500 Series User

Guide, available on your Documentation CD, or check the Dell Support

website at support.dell.com/manuals for the latest updates on documentation

and software.

In this document, the word "switch" refers to either a single switch or a group

of stacked switches.

For a complete description of the PowerConnect 5500 series switch, see the

Dell PowerConnect 5500 Series User Guide, available on your Documentation

CD.

NOTE:

Even though the graphics in this guide show the Dell PowerConnect 5524P

device, the instructions are the same for all models.

Site Preparation

PowerConnect 5500 series switches can be mounted in a standard 48.26-cm

(19-inch) equipment rack or placed on a tabletop. Before installing the unit,

verify that the chosen location for installation meets the following site

requirements:

•

Power —

–

The unit is installed near an easily accessible 100-240 VAC, 50-60 Hz

outlet.

–

If a Redundant Power Supply (RPS) or a Modular Power Supply

(MPS) is being used, check that it is easily accessible.

•

Clearance — There is adequate frontal clearance for operator access.

Allow clearance for cabling, power connections, and ventilation.

Getting Started Guide