Dell POWERCONNECT 5548P Panduan Memulai - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Dell POWERCONNECT 5548P. Dell POWERCONNECT 5548P 20 halaman. Powerconnect 5500 series
Juga untuk Dell POWERCONNECT 5548P: Catatan Rilis (15 halaman)
Halaman Cetak
7 Set up user account privilege level, as follows:
The following information is displayed:
Now we need to set up your initial privilege
(Level 15) user account. This account is used to
login to the CLI and Web interface. You may set up
other accounts and change privilege levels later.
For more information on setting up user accounts
and changing privilege levels, see the user
documentation.
To set up a user account:
Enter the user name:
Please enter the user password:
Please reenter the user password:
8 Enter the following:
•
User name, for example "admin"
•
Password and password confirmation.
9 Press Enter.
The following information is displayed:
Next, an IP address is setup. The IP address is
defined on the default VLAN (VLAN #1). This is the
IP address you use to access the Telnet, Web
interface, or SNMP interface for the switch.
To set up an IP address:
Please enter the IP address of the device
(A.B.C.D):
Please enter the IP subnet mask (A.B.C.D or nn):
10 Enter the management IP address and IP subnet mask, for example
192.168.2.100 as the IP address and 255.255.255.0 as the IP subnet mask.
Configuring the Switch
19