Dell PowerConnect 7048 Meningkatkan Firmware - Halaman 12
Jelajahi secara online atau unduh pdf Meningkatkan Firmware untuk Beralih Dell PowerConnect 7048. Dell PowerConnect 7048 24 halaman. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Juga untuk Dell PowerConnect 7048: Catatan Rilis (27 halaman)
Halaman Cetak
Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or
4.x.x.x or 5.x.x.x to 5.1.9.3 Firmware
console#show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit
image1
--------------------------------------------------------------------
1
4.2.1.3
2
5.1.9.3
console#boot system 1 image2
Activating image image1 ..
console#boot system 2 image1
Activating image image1 ..
console#show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit
image1
--------------------------------------------------------------------
1
4.2.1.3
2
5.1.9.3
console#update bootcode
Update bootcode and reset (Y/N)?y
Management switch has unsaved changes.
Are you sure you want to continue? (Y/N) y
Issuing boot code update command...
Validating boot code from image...CRC Valid.
NOTE:
After upgrading the switch firmware version to 5.1.9.3, the CPLD
(Complex Programmable Logic Device) code update is required on M8024-k
and PC8024/PC8024F switches if switch is running with the older CPLD
version. CPLD update can be done only via switch serial console (not
through SSH or Telnet). The latest CPLD version available for M8024k and
PC8024/PC8024F switch is Version 6.
NOTE:
Administrators upgrading PowerConnect 8024/8024F/M8024k
switches MUST use the CPLD update instructions documented in detail
below.
image2
current-active
5.1.9.3
image1
4.2.1.3
image2
image2
current-active
5.1.9.3
image1
4.2.1.3
image2
Page 9
next-active
image1
image2
next-active
image2
image1