Dell PowerEdge M420 Panduan Memulai - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Dell PowerEdge M420. Dell PowerEdge M420 12 halaman. Dell poweredge blade servers getting started guide
Juga untuk Dell PowerEdge M420: Pembaruan Informasi (38 halaman), Catatan Rilis (27 halaman), Manual (25 halaman), Panduan Pengguna (23 halaman), Panduan Informasi Penting (35 halaman), Manual Pembaruan (32 halaman), Manual Pembaruan (28 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (22 halaman), Panduan Memulai (12 halaman), Manual (38 halaman), Panduan Teknis (46 halaman), Panduan Teknis (48 halaman), Panduan Portofolio (27 halaman), Panduan Memulai (14 halaman)

Connecting The System To Power

Figure 6. Connecting Power to the System

Connect the system's power cables to the system power supplies.

CAUTION: To prevent the power cables from being disconnected accidentally, use the plastic clip on each power

supply to secure the power cable to the power supply, and use the strap to secure the power cable to the strain-

relief bar.

CAUTION: For AC power supply, do not plug the power cables directly into a power outlet; you must use a PDU. For

optimal system functionality, a minimum of three power supplies are required.

Plug the other end of the power cables of the AC power supplies into a power distribution unit (PDU). For DC power

supplies, plug the other end of the power cables to a branch-protected DC power source.

NOTE: The power supply units must have the same maximum output power.

NOTE: AC and DC power supplies cannot be mixed in an enclosure.

Turning On The Enclosure

Figure 7. Enclosure Power Button

Press the power button on the enclosure. The power indicator should light.