Dell PowerEdge M520 Pembaruan Informasi - Halaman 4

Jelajahi secara online atau unduh pdf Pembaruan Informasi untuk Beralih Dell PowerEdge M520. Dell PowerEdge M520 38 halaman. Dell poweredge blade servers getting started guide
Juga untuk Dell PowerEdge M520: Catatan Rilis (27 halaman), Manual (25 halaman), Panduan Pengguna (23 halaman), Panduan Informasi Penting (35 halaman), Manual Pembaruan (32 halaman), Manual Pembaruan (28 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (22 halaman), Panduan Memulai (12 halaman), Panduan Teknis (46 halaman), Panduan Teknis (45 halaman), Panduan Portofolio (27 halaman), Panduan Memulai (14 halaman), Panduan Memulai (12 halaman)

System Security Screen

Option

Intel(R) TXT (Disabled

default)

New POST Messages

The following are the new POST messages for the Intel Xeon 5600 series

processors.

Message

System Memory Size:

X.X GB, System Memory

Speed: XXX MHz,

Voltage: 1.5V or 1.35V

This CPU power rating

is not supported

Non-ECC DIMM detected

on DIMM XX

Description

Enables/disables Trusted Execution Technology. To enable

TXT, enable & activate VT & TPM with pre-boot

measurement.

Description

Displays the amount of system memory, system

memory speed, and current system memory

operating voltage.

This message displays when either of the following

occurs:

• The Intel Xeon 5600 130 W series processor is

detected on an old system board (systems not marked

with roman numeral II). For a list of the supported

systems, see Important Information.

• The Intel Xeon X5677 130 W series quad-core

processor is detected on PowerEdge M610 and

M710.

Displays when the system detects a non-ECC

memory module.