Dell PowerEdge M520 Panduan Teknis - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Beralih Dell PowerEdge M520. Dell PowerEdge M520 46 halaman. Dell poweredge blade servers getting started guide
Juga untuk Dell PowerEdge M520: Pembaruan Informasi (38 halaman), Catatan Rilis (27 halaman), Manual (25 halaman), Panduan Pengguna (23 halaman), Panduan Informasi Penting (35 halaman), Manual Pembaruan (32 halaman), Manual Pembaruan (28 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (22 halaman), Panduan Memulai (12 halaman), Panduan Teknis (45 halaman), Panduan Portofolio (27 halaman), Panduan Memulai (14 halaman), Panduan Memulai (12 halaman)

Halaman Cetak
Dell PowerEdge M520 Panduan Teknis

7 Networking and mezzanine cards

The Dell PowerEdge M520 system supports two embedded Broadcom 5720 Dual Port 1Gb LOMs for
a total of four 1Gb ports.
The M520 also offers balanced, scalable I/O capabilities, including integrated PCIe 3.0 capable
mezzanine card slots. Installation of mezzanine cards requires an M1000e I/O module (IOM) of the
same fabric technology to be installed in the corresponding fabric slot of the mezzanine to support
data flow through that fabric or slot.

System management integration

With the M520 system, the job of deploying, updating and monitoring is fast and easy. System
management integration features include the following:
Pre-boot: Use the Dell Lifecycle Controller graphical user interface (GUI) to set configuration
such as bandwidth allocation or firmware revision level.
Post-boot: Agent-free out-of-band or high-speed in-band connection over LOM through the
Operating System/BMC pass-through feature for sensory information.
Automation of firmware and driver version deployment upon component replacement.
Automatic monitoring of NIC status and notification on SNMP traps.
Local or remote re-configuration of any NIC, physical or virtual.
PXE boot enabled on all LOM and NDCs for ease of use.
Boot from SAN (iSCSI, FCoE) configuration for networking devices through the Lifecycle
Controller GUI.

Mezzanine cards

The M520 provides two PCIe 3.0 mezzanine connectors for add-in cards. The M520 has been
designed to be PCIe 3.0 compliant in order to take full advantage of the processor capabilities.
Table 13 lists the supported mezzanine cards for the M520.
Type
1Gb/10Gb Adapters
Fibre Channel
PowerEdge M520 Technical Guide
24
Table 13.
Supported mezzanine cards
Adapter
Broadcom 5719 Serdes 4P 1Gb
Intel I350 Serdes 4P 1Gb
Qlogic QME8262-k 2P 10Gb
Brocade BR1741M-k 2P 10Gb
Broadcom 57810S-k 2P 10Gb
Intel X520-x/k 2P 10Gb
QLogic QME2572 2P 8Gb
Emulex LPe1205-M 2P 8Gb