Dell PowerEdge M820 Systems Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Dell PowerEdge M820 Systems. Dell PowerEdge M820 Systems 23 halaman. Dell poweredge blade servers getting started guide
Juga untuk Dell PowerEdge M820 Systems: Pembaruan Informasi (38 halaman), Catatan Rilis (27 halaman), Panduan Informasi Penting (35 halaman), Manual Pembaruan (32 halaman), Manual Pembaruan (28 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (22 halaman), Panduan Memulai (12 halaman), Panduan Pemilik (3 halaman), Panduan Teknis (46 halaman), Panduan Portofolio (27 halaman), Panduan Memulai (14 halaman), Panduan Memulai (12 halaman), Panduan Teknis (47 halaman)

Rev 1.0

Overview

The PTM is an I/O module designed for the PowerEdge M1000e Dell Chassis. The product pro-

vides 10Gigabit connectivity for blade servers to Ethernet LANs. The product supports the follow-

ing Ethernet protocols.

Table 3 - Protocols

Physical Connections

Blade Servers to PTM (Internal Links)

Front Panel Ports (External Links)

Each front panel port provides connectivity to the blade with the corresponding number in the

chassis.

Figure 1: Dell 10Gb Ethernet Pass Through -k module Front Panel

10 Gb Ethernet Pass Through -k

1.1

The PTM feature set includes:

Internal Links

• 16 ports of 10Gb Ethernet 10GBASE-KR through the backplane

External links

• 16 SFP+ front panel ports of 10Gb Ethernet

IEEE and Other Ethernet Standards Compliance

• IEEE 802.3ae 10Gigabit Ethernet support

• IEEE 802.3ap Ethernet Operation over Electrical Backplanes

• Including KR startup protocol and Forward Error Correction (FEC) support

• Supports KR auto-negotiation

• Jumbo Frames up to 9K support

Connectors and Cabling

• Twin Axial Pair connector

• Optical modules for SR and LR

• All ports support active cables

Pass Through -k Protocol

10G XFI

Overview