Dell PowerVault 56F Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Dell PowerVault 56F. Dell PowerVault 56F 6 halaman. Dell powervault 56f switches rack installation guide
Juga untuk Dell PowerVault 56F: Manual Koneksi (38 halaman), Instal Manual (8 halaman), Panduan Pengguna (42 halaman), Panduan Pemasangan Rak (28 halaman)
Halaman Cetak
(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\Labrador\Ug\89TMRc10.fm
1-4
Dell PowerVault 56F 16-Port Fibre Channel Switch User's Guide
8QLYHUVDO 3RUWV
The switch is manufactured with 16 universal ports (U_Ports). U_ports provide the
greatest amount of flexibility when building a fabric because the ports automatically
and dynamically configure themselves to operate in E_Port, F_Port, or FL_Port mode
during port installation. The ports negotiate from the FL_Port to the higher-performing
F_Port if the attached device supports both modes.
(PEHGGHG 3RUW
The embedded port, which is a logical N_Port, is based on a microcontroller and is
responsible for:
Fibre Channel link control
Switch management
Routing table management
Address assignment and management functions
Management of Class F services and the related protocols as defined in the Fibre
Channel Standard
The embedded port also functions as a Simple Network Management Protocol
(SNMP) agent, a Fibre Channel name server, and an alias server to manage multicast
and broadcast functions.
6\VWHP )LUPZDUH
Included with the switch is firmware that can be customized and tuned for each instal-
lation. Dell has provided a standard set of commands and interfaces described in
"PowerVault 56F Commands" of the Dell PowerVault 56F 16-Port Fibre Channel
Switch Installation and Troubleshooting Guide for switch monitoring, control, and
management.
6:/ )LEHU2SWLF *%,& 0RGXOH
The short-wave laser (SWL) fiber-optic GBIC module is based on short wavelength
850 nanometer (nm) lasers supporting 1.0625 gigabytes-per-second (Gbps) links
speeds.This GBIC module supports 50-micrometer and 62.5-micrometer multimode
fiber and is supported only in non-Open Fibre Connection (OFC) mode. 50/125-
micrometer cables up to 500 meters (m) in length and 62.5/125-micrometer cables up
to 175 m in length are supported.
NOTE: The SWL GBIC module uses a Class 1 CD laser, which complies with the 21
CFR, subpart (J) as of the date of manufacture.
DELL CONFIDENTIAL - Preliminary
4/11/00