Dell S25V Panduan Memulai Cepat - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Dell S25V. Dell S25V 27 halaman.

Installing the Software

The FTOS prompt changes to indicate the CLI mode. You must move linearly

through the command modes, with the exception of the end command which

takes you directly to EXEC Privilege mode; the exit command moves you up

one command mode level.

Access the command line through a serial console port or a Telnet session.

When the system successfully boots, you enter the command line in the EXEC

mode.

NOTE: You must have a password configured on a virtual terminal line before you

can Telnet into the system. Therefore, you must use a console connection when

connecting to the system for the first time.

Serial Console

The RS-232 console port is labeled on the chassis. It is in the upper right-hand

side, as you face the PSU side of the chassis.

Installing the Software