Dell S4048T-ON Panduan Memulai - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Dell S4048T-ON. Dell S4048T-ON 35 halaman.

Figure 3. Assembly to S4048T-ON PSU-side attachment

CAUTION:

Take care not to damage the attached ground wire as you proceed to

install the switch.

After the switch is installed in the rack, see

ReadyRails installation

The ReadyRails rack mounting system is provided to easily configure your rack so that you

can install your switch.

Use the Dell ReadyRails™ system in 1U front-rack and two-post installations. The ReadyRails

system includes two separately packaged rail assemblies and two rails that are shipped

attached to the sides of the switch. Install the ReadyRails system using the 1U tool-less

method or one of three possible 1U tooled methods—two-post flush mount, two-post

center mount, or four-post threaded.

CAUTION:

Your system is not NEBS Earthquake Z4-compliant if you use the 1U tool-

less square-hole or two-post installation methods.

CAUTION:

Do not use the mounted ReadyRails as a shelf or a workplace.

NOTE:

The illustrations in this document are not intended to represent a specific

switch.

Ground wire

installation.

Hardware installation