Dell S4100-ON Series Panduan Instalasi - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Dell S4100-ON Series. Dell S4100-ON Series 48 halaman.
Juga untuk Dell S4100-ON Series: Panduan Instalasi (47 halaman), Setup Manual (21 halaman), Panduan Instalasi (49 halaman)
Halaman Cetak
LED
Table 10. QSFP+ port LEDs: 4x10G/1G mode
LED
Link/Activity LED—4x10G mode
Prerequisites
The following is a list of required and optional components for the S4100–ON Series (S4128F-ON, S4148F-ON, and S4148FE-ON) switch:
NOTE:
Detailed installation instructions are provided in the
•
S4100–ON Series (S4128F-ON, S4148F-ON, or S4148FE-ON) switch, or multiple switches, if stacking
•
AC country- and regional-specific cables to connect the AC power source to each of the switches' AC power supplies
•
Mounting brackets for rack installation, included
•
Screws for rack installation
•
#1 and #2 Phillips screwdrivers, not included
•
Torx screwdriver, not included
•
Ground cable screws, included
•
Copper or fiber cables
Other optional components are:
•
Ground cable and lug for the frame-end of the ground cable
•
Extra power supply unit
•
Extra fan module
•
Extra mounting brackets if installing in a four-post rack or cabinet
S4100-ON Series configurations
The S4100-ON Series (S4128F-ON, S4148F-ON, and S4148FE-ON) switches are available in several different configurations.
All S4100-ON Series switches include the following configurations:
•
Fan with airflow from the I/O side to the PSU side—normal
•
Fan with airflow from the PSU side to the I/O side—reverse
•
AC power supply with airflow from the I/O side to the PSU side—normal
•
AC power supply with airflow from the PSU side to the I/O side—reverse
14
S4100–ON Series switch
Description
•
Flashing green—Link activity operating at maximum speed—
40G port
•
Solid yellow—Link operating at a lower speed—40G port
•
Flashing yellow—Link activity at a lower speed—40G port
•
Flashing yellow, 1 second on/off—Port beacon
Description
•
Off—No link
•
Solid green—Link operating at maximum speed—10G port
•
Flashing green—Link activity operating at maximum speed—
10G port
•
Solid yellow—Link operating at a lower speed—1G port
•
Flashing yellow—Link activity at a lower speed—1G port
•
Flashing yellow, 1 second on/off—Port beacon
Site preparations
and
S4100-ON Series installation
sections.