Dell S4100-ON Series Panduan Instalasi - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Dell S4100-ON Series. Dell S4100-ON Series 49 halaman.
Juga untuk Dell S4100-ON Series: Panduan Instalasi (47 halaman), Setup Manual (21 halaman), Panduan Instalasi (48 halaman)

Halaman Cetak

NOTE:

You do not see module LEDs when the switch powers up in ONIE as the software controls the modules.

Storing components

If you do not install your S4100–ON Series (S4128F-ON, S4148F-ON, S4148FE-ON, S4128T-ON, S4148T-ON, and S4148U-ON)

switch and components immediately, properly store the switch and all optional components following these guidelines:

● S4128F-ON, S4148F-ON, S4148FE-ON, S4128T-ON, S4148T-ON: Storage location temperature must remain constant. The

storage range is from -40° to 65°C (-40° to 149°F).

● S4148U-ON: Storage location temperature must remain constant. The storage range is from -40° to 70°C (-40° to 158°F).

● Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.

● Store in a dust-free environment.

CAUTION:

ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or

heel ground strap when handling the S4100–ON Series switch and its accessories. After you remove the original

packaging, place the switch and its components on an anti-static surface.

Site preparations