Dell S5048F-ON Pembaruan Firmware - Halaman 7

Jelajahi secara online atau unduh pdf Pembaruan Firmware untuk Beralih Dell S5048F-ON. Dell S5048F-ON 19 halaman.
Juga untuk Dell S5048F-ON: Setup Manual (29 halaman)

Halaman Cetak

No pending firmware updates present.

ONIE:/ #

4. Run the onie-fwpkg command with the add subcommand.

This step stages the update in the ONIE-Boot partition.

5. Run the onie-fwpkg command with the show subcommand.

This step displays any pending firmware updates.

6. Run the onie-boot-mode command to set the system to ONIE Update mode for the next boot.

root@nos:/tmp# wget http://<http-server-ip>/onie/ onie-firmware-x86_64-VENDOR_MACHINE-

r0.bin

root@nos:/tmp# mkdir -p /mnt/onie-boot

root@nos:/tmp# mount LABEL=ONIE-BOOT /mnt/onie-boot

root@nos:/tmp# /mnt/onie-boot/onie/tools/bin/onie-fwpkg add onie-firmware-x86_64-

VENDOR_MACHINE-r0.bin

Staging firmware update: /tmp/ onie-firmware-x86_64-VENDOR_MACHINE-r0.bin

root@nos:/tmp# /mnt/onie-boot/onie/tools/bin/onie-fwpkg show

** Pending firmware update information:

Name

======================+===========================+==========+============+===========

onie-firmware-update|firmware-demo-202208031508|0

22:29:27

======================+===========================+==========+============+===========

root@nos:/tmp# /mnt/onie-boot/onie/tools/bin/onie-boot-mode -q -o update

root@nos:/tmp# umount /mnt/onie-boot

root@nos:/tmp# reboot

7. Reboot the system.

After you reboot, the target boots to ONIE Update mode. ONIE firmware infra locates the firmware updater binary image

and starts the firmware update steps. After the firmware update, the target boots back to NOS.

8. Check the firmware update results using the show-results option of the onie-fwpkg command.

You can run this command in ONIE or by mounting the ONIE partition in NOS.

onie-fwpkg

onie-fwpkg show-results

firmware-x86_64-dell_<platform>_c2338-r0.x.x.x.x.bin ot/users/<name>/<platform>/onie-

converted 'http://<http-server-ip>/tftpboot/users/mshanmugam/<platform>/onie-

firmware-x86_64-dell_<platform>_c2338-r0.x.x.x.x.bin' (ANSI_X3.4-1968)

-> 'http://<http-server-ip>/tftpboot/users/mshanmugam/<platform>/onie-firmware-x86_64-

dell_<platform>_c2338-r0.x.x.x.x.bin' (UTF-8)

--2022-08-03 20:08:35--

onie-firmware-x86_64-dell_<platform>_c2338-r0.x.x.x.x.bin

Connecting to 10.14.1.208:80... connected.

HTTP request sent, awaiting response... 200 OK

Length: 12822391 (12M) [application/octet-stream]

Saving to: 'onie-firmware-x86_64-dell_<platform>_c2338-r0.x.x.x.x.bin'

onie-firmware-x86_6 100%[=====================>]

2022-08-03 20:08:36 (50.2 MB/s) - 'onie-firmware-x86_64-dell_<platform>_c2338-

r0.x.x.x.x.bin' saved [12822391/12822391]

linuxadmin@OS10:~$ sudo

mount: /dev/sda2 is already mounted or /mnt/onie-boot busy

/dev/sda2 is already mounted on /mnt/onie-boot

linuxadmin@OS10:~$ sud o/mnt/onie-boot/onie/tools/bin/onie-fwpkg

-bash: sud: command not found

linuxadmin@OS10:~$ sudo /mnt/onie-boot/onie/tools/bin/onie-fwpkg

** Pending firmware update information:

No pending firmware updates present.

linuxadmin@OS10:~$ sudo /mnt/onie-boot/onie/tools/bin/onie-fwpkg purge

Removing all pending firmware updates (y/N)? y

Purging all pending firmware updates.

Removing firmware update results: INSTALLER-DND-SG-2.0.0.0.bin

Removing firmware update results: onie-firmware-x86_64-dell_<platform>_c2338-

|Version

http://<http-server-ip>/tftpboot/users/mshanmugam/<platform>/

mkdir -p /mnt/onie-boot

mount LABEL=ONIE-BOOT /mnt/onie-boot

|Attempts|Size(Bytes)|Date

|11470711

12.23M

50.2MB/s

|2022-08-03

in 0.2s