Dell S6100 Catatan Rilis - Halaman 6
Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih Dell S6100. Dell S6100 13 halaman.
such process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
machine restart
NOTE: You can use either HTTP or TFTP to install the DIAG-OS, as shown.
The following example shows how to install the DIAG-OS using the onie-nos-install
command with HTTP.
ONIE:/ # onie-nos-install http://<http-server-ip>/<Diag-installer-image-
path>/<Diag-installer-image>
ONIE:/ # onie-nos-install http://x.x.x.x/diag-installer-x86_64-dell_s6100_c2
538-r0-2015-11-23.bin
discover: installer mode detected.
Stopping: discover... done.
Info: Fetching http://x.x.x.x/diag-installer-x86_64-dell_s6100_c2538-
r0-2015-11-23.bin ...
Connecting to x.x.x.x (x.x.x.x:x)
installer
ETA
ONIE: Executing installer: http://x.x.x.x/diag-installer-x86_64-
dell_s6100_c2538-r0-2015-11-23.bin
Ignoring Verifying image checksum ... OK.
cur_dir / archive_path /installer tmp_dir /tmp/tmp.TAGygf
Preparing image archive ...sed -e '1,/^exit_marker$/d' /installer | tar xf
- OK.
DiagOS Installer: platform: x86_64-dell_s6100_c2538-r0
Found EDA-DIAG partition at (/dev/sda3)
/tmp/diag_os_install_mode does not exist, installer would run in update
mode
Diag OS Installer Mode : UPDATE
Update mode: Copying rootfs.....
Preparing /dev/sda3 EDA-DIAG for rootfs install
Preparing Diag-OS file system : dev /dev/sda3 mnt dir
untaring into /boot
Success: Support tarball created: /boot/onie-support.tar.bz2
Removing /tmp/tmp.TAGygf
Rebooting...
ONIE:/ # discover: installer mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 281: No
such process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache
6
100% |*******************************|
167M
/boot
Dell Release Notes for the S6100–ON System
0:00:00