Dell SwitchX M4001Q Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Dell SwitchX M4001Q. Dell SwitchX M4001Q 27 halaman. Infiniband blade switch i/o module for poweredge m-series

Halaman Cetak

1. I2C Interface Rj-45 Connector

InfiniBand Blade Switch I/O Module for PowerEdge M-Series

About this Manual

This manual describes the installation and basic use of the SwitchX® M4001F(FDR) 56 Gb/s,

M4001T(FDR10) 40Gb/s and the M4001Q(QDR) 40 Gb/s InfiniBand blade switch I/O modules

for the PowerEdge M-Series chassis.

Intended Audience

This manual is intended for users and system administrators responsible for installing and setting

up the switch platforms listed above.

The manual assumes familiarity with the InfiniBand® Architecture Specification.

Related Documentation

The documentation set accompanying the Mellanox M4001[F, T, Q] includes the following:

Table 2 - Reference Documents

InfiniBand Architecture Specification

Volume 1 Release 1.2.1 and Volume 2

release 1.2.1

Mellanox Firmware Tools (MFT)



User's Manual

Document # 2329

Online Resources

• Mellanox Technologies Web pages:

• Dell Support Web pages:

Conventions

Throughout this manual, the names M4001F, M4001T, and M4001Q and the terms switch, I/O

module, and IOM are used to describe the M4001F FDR, M4001T FDR10, and the M4001Q QDR

InfiniBand blade switch I/O modules, unless explicitly indicated otherwise.

InfiniBand architecture specification descriptions



The MFT (Mellanox Firmware Tools) package is a set of firmware tools. The

manual supplied with this package provides an overview of the firmware its

installation and replacement. The MFT can be downloaded with its documenta-

tion at: 

http://www.mellanox.com

http://support.dell.com

> Downloads > Firmware Tools.

Mellanox Technologies

Rev 1.2