Dell SwitchX M4001T Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Dell SwitchX M4001T. Dell SwitchX M4001T 27 halaman. Infiniband blade switch i/o module for poweredge m-series
Halaman Cetak
InfiniBand Blade Switch I/O Module for PowerEdge M-Series
(non blinking indicating that no data is being transferred yet). When a logical connection is made
the yellow LED will blink signifying data is being transferred.
Cables in theBelly to Belly right side should be inserted up side down in relation to the
how the cables are inserted in the left side.
To remove, disengage the locks and slowly pull the connector away from the port receptacle. Both
LED indicators will turn off when the cable is unseated.
Care should be taken not to impede the air exhaust flow through the chassis.
Cable lengths should be used which allow for routing horizontally around to the side of
the chassis before bending upward or downward in the rack.
2.4.1 Supported Approved Cables
For a list of all approved cables see:
www.mellanox.com/related-docs/user_manuals/Mellanox_approved_cables.pdf
Figure 6: Belly to Belly Cable Insertion
Mellanox Technologies
Rev 1.2
15