Dell Z9000 Panduan Memulai Cepat - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Dell Z9000. Dell Z9000 27 halaman. Z9000 system
Juga untuk Dell Z9000: Manual (48 halaman)

Halaman Cetak

Installing the Software

Navigating CLI Modes

The Dell Force10 Operating Software (FTOS) prompt changes to indicate the

Command Line Interface (CLI) mode. You must move linearly through the

command modes, with the exception of the end command which takes you

directly to EXEC Privilege mode and the exit command which moves you up

one command mode level.

Console Access

NOTE: You must have a password configured on a virtual terminal line before you

can Telnet into the Z9000 system. Therefore, you must use a console connection

when connecting to the system for the first time.

Serial Console

The RJ-45/RS-232 console port is labeled on the upper right-hand side as you

face the Input/Output (I/O) side of the Z9000 system.

To access the console port, follow these steps:

Step

Task

Install an RJ-45 copper cable into the console port.

Connect the other end of the cable to the DTE terminal server.

Primary Management

(Ethernet) Port

RJ-45/RS-232

Console Port

Installing the Software