Entech U-BLUE Panduan Pengoperasian - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Penyaringan Air Entech U-BLUE. Entech U-BLUE 15 halaman. Undersink alkaline water ionizer
TABLE OF CONTENTS
Description
Safety Precautions
Power Related
Installation Precautions
During Usage
pH Reagent Liquid Precautions
Some helpful tips
How to Use
Names and functions of Parts I
Names and functions of Parts II
Accessoriesl
How to Install
How to use
How to measure pH
How to set your individual pH levels
How to replace the filter
Filter composition
Water flow diagram
Customer Service
Trouble shooting guide
Specifications
Warranty Card
2
03
03
04
05
05
06-07
08-09
10
11-12
13-16
17
18-19
20-21
22
23
24-25
26
27
Safety Precautions
If a break down occurs, do not make a repair by yourself. Contact the place of purchase or A/S center.
Electrical power precautions
If your ionizer becomes submerged
in water, unplug the power cord from
the wall BEFORE removing the
ionizer from the water.
Failure to do so may cause electric shock!
NEVER attempt to repair or service the unit yourself.
Contact your dealer.
Attempting to do so will void your valuable warranty!
NEVER touch the power cord or plug with wet hands
- this may result in electric shock!
Ensure the power plug is firmly and
properly inserted into the outlet
- failure to do so may result in electric
shock or fire!
Installation Precautions
Protect your ionizer from freezing
temperatures.
Protect your ionizer from direct
sunlight.
Maintenance Precautions
Always unplug your ionizer when changing the fuse or cleaning your ionizer
- failure to do so may result in electric shock.
Do not use your ionizer at voltages other than specified
(AC 110V FOR USA).
Use a GFI outlet. Do not plug in your ionizer where it
will exceed the rating of outlet or electric wiring.
Failure to do so can result in fire, injury and/or
damage to yourself, wiring or ionizer!
220V
Do not wash your ionizer by immersion or by pouring
water over the main body;
always unplug your ionizer while cleaning the casing.
Clean with damp sponge or cloth.
Do not put anything heavy on top of your ionizer.
Do not install your ionizer on an unstable or soft
surface. Install only on a hard and level surface.
3