Dell Inspiron 1110 Panduan Instalasi - Halaman 43

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer Dell Inspiron 1110. Dell Inspiron 1110 48 halaman. Dell inspiron inspiron 11z: specifications
Juga untuk Dell Inspiron 1110: Lembar Data Keselamatan Produk (7 halaman), Fitur (2 halaman)

Halaman Cetak

Do not mix paper types in the paper tray.

Use only recommended print materials. See

Ensure that the recommended print side of print materials is facing up in the paper tray.

Understanding the Operator Panel LEDs

The operator panel LEDs signify different things, depending on their sequences. LEDs that are off, on, and/or blinking indicate printer conditions such as

printer status, intervention (for example, out of paper and jammed paper), or service.

The following table shows the most common LED sequences. Find the LED pattern below that matches the printer LED pattern and check the meaning and

solution.

LED Status Legend

LED Pattern

Meaning and Suggested Solution

Your printer has some problems. If this problem occurs, contact your service representative.

• A paper jam has occurred. To solve the problem, see

• The front cover is open. Close the front cover.

• The top cover is open. Close the top cover.

• The paper tray is empty. Load paper in the tray. See

• A toner cartridge is not installed. Install a toner cartridge. See

• If the printer is receiving data,

• If the printer is printing received data,

• You pressed

• In Manual Duplex mode, the first side of your job has printed. Load the paper back into the tray and press

For details, see

You print in 600dpi resolution and your printer does not have enough memory to print the current job. When the Printing Status

window appears, select one of the following options.

• Click Cancel. An Internal error sheet prints and the current job automatically clears. Try simplifying the page layout and

removing unnecessary graphics from your document.

• Click Print. Your printer prints the current job in 300 dpi resolution. If a memory shortage occurs again, the Printing Status

window will appear again and an Internal error sheet will print. The current job automatically clears. Try simplifying the page

layout and removing unnecessary graphics from your document.

In Manual Feed mode, there is no paper in the paper tray. Load paper into the tray and press

The toner cartridge is nearly empty. Redistribute the toner to temporarily extend the life of the toner cartridge. If this does not

improve print quality, install a new toner cartridge. See

Troubleshooting Checklist

If the printer is not working properly, consult the following checklist. If the printer does not pass a step, follow the corresponding troubleshooting suggestions.

Check

Check the power cord and

"Paper

Specifications".

blinks green slowly.

blinks green quickly.

while the printer was receiving data.

"Printing on Both Sides of Paper (Manual