Dell Inspiron 1110 Panduan Instalasi - Halaman 46
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer Dell Inspiron 1110. Dell Inspiron 1110 48 halaman. Dell inspiron inspiron 11z: specifications
Juga untuk Dell Inspiron 1110: Lembar Data Keselamatan Produk (7 halaman), Fitur (2 halaman)
Halaman Cetak
Vertical lines
Gray background
Toner smear
Vertical repetitive defects
Background scatter
Misformed characters
Page skew
Curl or wave
Wrinkles or creases
• A single sheet of paper may be defective. Try reprinting the job.
• The moisture content of the paper is uneven or the paper has moist spots on its
surface. Try a different brand of paper. See
• The paper lot is bad. The manufacturing process can cause some areas to reject toner.
Try a different kind or brand of paper.
• The toner cartridge may be defective. See
• If these steps do not correct the problems, contact a service representative.
If black vertical streaks appear on the page, the drum inside the toner cartridge has probably been scratched. Install a
new toner cartridge. See
"Replacing the Toner
If the amount of background shading becomes unacceptable:
• Change to lighter weight paper. See
• Check the printer's environment; very dry (low humidity) or high humidity (higher than
80% RH) conditions can increase the amount of background shading.
• Remove the old toner cartridge and install a new one. See
Cartridge".
• Clean the inside of the printer. See
• Check the paper type and quality. See
• Remove the toner cartridge and install a new one. See
If marks repeatedly appear on the printed side of the page at even intervals:
• Clean the inside of the printer. See
the printer, if you still have the same problems, install a new toner cartridge. See
"Replacing the Toner
Cartridge".
• Parts of the printer may have toner on them. If the defects occur on the back of the page,
the problem will likely correct itself after a few more pages.
• The fusing assembly may be damaged. Contact a service representative.
Background scatter results from bits of toner distributed on the printed page.
• The paper may be too damp. Try printing with a different batch of paper. Do not open
packages of paper until necessary so that the paper does not absorb excess moisture.
• If background scatter occurs on an envelope, change the printing layout to avoid printing
over areas that have overlapping seams on the reverse side. Printing on seams can
sometimes cause problems.
• If background scatter covers the entire surface area of a printed page, adjust the print
resolution through your software application or the printer properties.
If characters are improperly formed and produce hollow images, the paper stock may be too slick. Try a different paper.
See
"Paper
Specifications".
• Ensure that the paper is loaded properly.
• Check the paper type and quality. See
• Ensure that the paper or other material is loaded correctly and the guides are not too
tight or too loose against the paper stack.
• Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high temperatures and humidity can cause
paper curl. See
"Paper
Specifications".
• Turn over the stack of paper in the paper tray. Also try rotating the paper 180° in the
paper tray.
• Ensure that the paper is loaded properly.
"Paper
Specifications".
"Vertical repetitive
defects".
Cartridge".
"Paper
Specifications".
"Replacing the Toner
"Cleaning the
Interior".
"Paper
Specifications".
"Replacing the Toner
"Cleaning the
Interior". After cleaning the inside of
"Paper
Specifications".
Cartridge".