EarthQuake IMAGE-X Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara EarthQuake IMAGE-X. EarthQuake IMAGE-X 4 halaman.

Halaman Cetak

Dear Valued Customer,

Thank you for purchasing the Imãge Series In-Wall Speaker systems, one of

Earthquake's most valued in-wall speaker lines. With the proper installation and

operation, the Imãge speakers will provide a lifetime of durability and high-end

performance.

It is very important to follow all installation/mounting instructions and recommendations

in this manual closely and carefully to insure optimal performance operation and

longevity.

Features:

- Elaborate crossover networks with ±3dB tonal adjustments

- High quality capacitors and no distortion steel core inductors

- Easy Turn-N-Lock™ installation mechanisms

- 1" (25mm) silk dome NEO swiveling tweeters

- Low mass woven poly fiber woofer cones with extra wide rubber surrounds

- Paintable frames and grilles

Painting Guidelines:

The Imãge speakers are paintable and can accept virtually any type of paint. Spray and

roller paint applications typically provide the best results. When you are ready to begin

painting, remember to shield the driver and tweeter from the paint. Also, be sure to

remove the inner grille cloth prior to painting and replace it once the paint has

completely dried.

Speaker Placement:

The Imãge speakers are designed to be flush mounted in the walls or ceilings. To

optimize their acoustics you should follow these simple guidelines:

For best stereo reproduction the speakers should be placed an equal distance from

your listening position and separated so that the angle between them is between 40

and sixty degrees. The units should be placed with the tweeters near the ear level of

the seated listener.

BASS

TREBLE

BASS

TREBLE

+3dB

0dB

-3dB

Figure 1

Specifications are subject to change without notice

WARNING: These products are

capable of generating high

sound pressure levels. You

should exercise caution when

operating these speakers. Long

term exposures to high levels of

sound pressure will cause permanent damage

to your hearing. Sound pressure levels

exceeding 85dB can be dangerous with

constant exposure, set your audio system to a

comfortable loudness level. Earthquake

Sound Corporation does not assume liability

for damages resulting from the direct use of

Earthquake speakers , and urges users to play

volume at moderate levels.

Mounting Considerations & Easy Installation Steps

In-Wall Speakers

IW-SUB1 0

IMÃGE-8X

LOCATE & MARK THE 2x4's

Outline the hole using the

supplied speaker template -

stay clear from the 2x4's.

CUT THE DRYWALL

Using a drywall saw, cut out the

opening.

CONNECT THE SPEAKER

Attach speaker wire and

insert the Imãge-X speaker

into the wall opening.

SECURE THE SPEAKER

Align the speaker in position

and tighten the screws

evenly to secure the unit.

Simply tighten the screws by hand using a screwdriver to prevent the

mounting ears from snapping. Some resistance may occur the first few turns

of the screw as it makes its path through the plastic.

www.earthquakesound.com

IMÃGE-8X

THOR

IMÃGE-C25X

IW-SUB10

Q10B

Tactile Transducer

Figure 2

PLACE THE GRILLE

Align the grille -

speaker cover - in

position. Gently push

cover into place.

IMÃGE-8X