Allied Time USA AT-2700 Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Jam Allied Time USA AT-2700. Allied Time USA AT-2700 8 halaman.
Halaman Cetak
Day Change Time
1.9
switch to the next calendar day. DEFAULT is set to midnight. To make changes, press Enter,
select desired Hour using
Daylight Savings Time
1.10
ON is selected, the clock will automatically adjust for Daylight Savings Time (begins 2
02:00 A.M in March and ends 1
Enter, select desired option using
Setup Pay Cycle
1.11
PAY=WEEKLY
(the day your weekly pay begins) in the next step. Select the Beginning Day of Weekly Pay Cycle
(RDATE = MON): press Enter and use
SAT (the week day your pay period begins). Example: if your weekly pay cycle is Monday through
Sunday, select MON and issue fresh time cards for each Monday of each week. Press Enter to
confirm your selection.
PAY=BI-WEEKLY
your bi-weekly pay cycle (RDATE = SUN JAN 1): press Enter and use
the week (Date and Month) of current month for your Bi-Weekly Pay Cycle beginning date. For
example, your pay cycle started on Monday January 6
on Saturday January 14
need to issue fresh time cards every two weeks. Press Enter to confirm your day/date selection.
PAY=SEMI-MONTHLY
month.
Select the Ending Date for Semi-Monthly pay cycle (EDATE=15
buttons to select one of the following pay cycle options:
th
st
1) 16
& 1
: your pay cycle ends on the 16
cards for the 2
th
2) 15
& LAST: your pay cycle ends on the 15
time cards for the 1
3) 14 & LAST-1: your pay cycle ends on the 14
4) 13 & LAST-2: your pay cycle ends on the 13
5) 12 & LAST-3: your pay cycle ends on the 12
6) 11 & Last-4: your pay cycle ends on the 11
7) 10 & Last-5: your pay cycle ends on the 10
After you make your selection, press Enter to confirm and proceed to the next step.
Page | 5
(DEFAULT=00:00): use to select time of the day when the clock should
+/-
buttons, then press Enter again to confirm.
(DAYL'T SAV=ON): use to turn ON or OFF Daylight Savings Time. If
st
Sunday 02:00 A.M in November). To make changes, press
+/ -
(PAY=WEEKLY): press Enter and use
: select this option for weekly pay cycle. You will be able to specify Reset Day
: select this option for bi-weekly pay cycle. Select the Beginning Date of
th
. The clock will reset every two weeks from the chosen day. You will
: select this option for semi-monthly pay cycle that lasts half of the
nd
th
and for the 17
day of each month.
st
th
and for the 16
, then press Enter again to confirm
+/-
+/-
buttons to select SUN, MON, TUE, WED, THU, FRI, or
th
and will continue for two weeks ending
th
st
and on the 1
of each month. Assign fresh time
th
and on the last day of the month. Assign fresh
day of each month.
th
and on 1-Day before the last day of the month
th
and on 2-Days before the last day of the month
th
and on 3-Days before the last day of the month
th
and on 4-Days before the last day of the month
th
and on 5-Days before the last day of the month
to select one of the options below:
+/-
buttons to enter Day of
th
&LAST): press Enter and use
nd
Sunday
+/-