Allied Vision MANTA Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Kamera Digital Allied Vision MANTA. Allied Vision MANTA 18 halaman.

Sensor

1. Place the camera on your work bench, with the sensor side facing up.

2. Place the magnifying glass above the camera, with sufficient space to access the TCG and the adhesive

tapes with tools.

3. Take the spatula with one hand.

4. With the spatula, push the cover glass down to keep the sensor protected.

Keep pushing down with the spatula until step

Figure 3: Spatula pushing down the cover glass (schematic view)

5. Take the screwdriver with the other hand.

6. On the left side of the sensor, carefully push the tool tip of the screwdriver against the corner of the

adhesive tape until it starts to come off. Continue lifting up the corner, until pliers can get a grip.

Figure 4: Screwdriver lifting up the adhesive tape (schematic view)

7. Put the screwdriver aside and take the pliers.

8. Keep pushing down with the spatula until step

Tape

Glass

Bare pixel surface

Tape

Figure 2: Sensor with TCG (schematic view)

15.

Spatula

Adhesive tape

Cover glass

15.

Page 5 of 18

Preparing Cameras without

Sensor Cover Glass

Screwdriver