EarthQuake Cinenova IR16 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat EarthQuake Cinenova IR16. EarthQuake Cinenova IR16 20 halaman. 8-zones multi-source ir driven amplifier

Halaman Cetak

EarthQuake Cinenova IR16 Panduan Pengguna

Keypad & Remote Map

Note: Wallplates are not included

MUTE

VOL+

VOL-

LED Status

This red colored LED indicates whether the amplifier is ON or OFF. When the amplifier is ON, this LED will be lit.

Volume Up/Down

This allows you to manually control the volume level up or down. The volume increases and decreases at the

same rate.

Note: This amplifier will hold the user defined volume setting for up to 3 hours from the last shut down.

Otherwise, the amplifier will start with volume position set to minimum to prevent undesired loud music in

unattended areas.

Mute

This allows you to mute or un-mute the associated amplifier(s) output.

IR Receiver

This feature allows the communication of all IR information between the Keypad and the rest of the system.

Coded signal controls the individual volume at each channel while other IR information can pass through

unaltered to the rest of the components connected to the provided IR out repeaters (page 11 - feature 12).

(!) NOTE: One Keypad is capable of driving multiple zones. Simply connect the CI wire of those zones in

parallel. For example, if you want to use the Keypad from zone 1 to control zone 1 through 5, remove the

Keypad connecting wires from zone 2 through 5 and parallel the CI wire of zone 2 through 5 to the CI of

zone 1.

(!) NOTE: If a zone is not connected to a Keypad, the speaker output will be muted (no audio output to

the speaker) unless you parallel connect that zone's CI wire to another zone's CI.

KEYPAD

In addition to the eight (8) Earthquake Keypads, we also provide you with remote controls that have the same

functions – Volume Up/Down and Mute. For your convenience, the remote information can be taught to any

remote with learning capability.